How should lead furnace clean dust?
There will be a lot of dust in the lead smelting furnace after it is used for a period of time. Is there any good way to get rid of it? In fact, there are many ways to remove dust. Today, let's take a look at how to remove dust from lead smelting furnaces.
How to remove dust from lead smelting furnace
1. Sintering dust removal: sintering dust removal can be carried out, but before dust removal, we need to consider desulfurization treatment or discharge through high chimney. It should be noted that the flue gas after sintering is very corrosive and the temperature will rise, so we should deal with these two points and carry out dust removal.
2. Bag dust removal: bag dust removal is adopted in lead smelting furnace, which is the most commonly used dust removal method. However, if the density of lead dust is too high or the viscosity is too high, it is not suitable to use cloth bag for dust removal, so as to avoid the lead dust falling on the fan impeller, which will easily affect the performance of lead smelting furnace and reduce the service life of lead smelting furnace.
For the manufacturers using lead smelting furnace, the correct dust removal can not only ensure the performance of lead smelting furnace will not be lost, but also can prolong its service life, so as to reduce the production cost of the manufacturer. It is very important to do a good job in dust removal of lead smelting furnace.