What furnace burden should be used
There will be a lot of problems in the use of lead smelting furnace. Xiaobian has been helping you to solve the problems in the use of lead smelting furnace. Today, the question I want to answer for you is the matters needing attention of lead smelting furnace burden. Charge is very important to lead furnace. What problems should be paid attention to when using charge? Let's take a look
The following problems should be paid attention to in the use of lead smelting furnace charge
Flux: Generally speaking, it is not necessary to add flux to the blower, because when smelting lead oxide or oxide ore, flux should be added according to slagging requirements, and the size is generally between 5cm and 10cm.
Slag return: in order to ensure the stability of furnace condition, the amount of slag returned during distribution is generally less than 15cm, and the amount of slag returned in normal production process can not exceed 10% of the feeding amount.
Scrap iron: the sulfur content will be too high after sintering. In order to reduce the sulfur content, it is necessary to add a small amount of iron chips into the blast furnace to reduce the sulfur content.
The above is about the use of lead smelting furnace charge should pay attention to the problem, I hope to bring you help. If you don't understand the lead smelting furnace, please call us at any time. I will tell you everything and help you solve the problem. This site continues to update, we will see you next time.