Points for attention in cupola smelting with lead smelting
Smelting lead provides raw materials for our industrial production, and a lot of lead is smelted every day. Once the smelting equipment starts, it generally does not stop, smelting lead also needs to pay attention to, because smelting lead also has considerable safety requirements. Today we will take a look at the attention points for smelting lead.
Before smelting lead, we should check that all the equipment is in good condition, and the staff should check whether there is no shortage of electrical equipment, water cooling system, inductor copper pipe and so on. Staff members shall not leave their posts privately, paying attention to the external conditions of sensors and crucible. When there is a fault in the lead furnace equipment, repair should be carried out in time, the pouring place and the pit in front of the furnace should be free of obstacles and no water accumulation, so as to prevent the molten steel from falling to the ground. Molten steel is not allowed to be overfilled. After pouring, the remaining steel should be poured into the designated position. When charging, check to see if there are flammable and explosive harmful substances in the burden, if so, should be removed in time.
The above is the attention point of smelting lead, because smelting is still quite a test of safety, in order to ensure the responsibility of staff, we need to pay more attention to prevent trouble.